BACK TO PREVIOUS PAGE
| Capacity: | 250 pounds with specific gravity of 1.4 |
| Shot Size: | From .5 to .4 oz. per stroke of pump. |
| Cycle Rate: | Minimum 20 shots per minute with material at 425°F. |
| Melting Tank: | 19" I.D. x 25" O.D. x 19" Deep. 12 GA steel construction, LP fired with a ring type burner, with output of 75,000 BTU/HR. 1/4" Bottom plate. Equipped with flame guard/deflector. |
| Electronic Ignition: | Direct spark electronic ignition system with safety shut down circuit. Warning light and buzzer when system "locks out". |
| Agitator: | Powered by a pneumatically driven, gear reduced motor, adjustable from 0 RPM to maximum RPM. |
| Pump: | Positive displacement piston and pump plate made of hardened tool steel. |
| Output Hose: | Electronically heated 10' stainless steel hose and 2' rigid dispensing wand with pistol grip handle and trigger actuation. RTD sensor. |
| Hose Temperature Control: | Regulated by an electronic temperature controller with variable settings to 400°F. |
| Anti-Drip Output Valve: | Disposable, mounted at end of hose to minimize dripping. The valve is pressure actuated and opens automatically when fluid pressure is applied. Rated at 425°F continuous duty. |
| Temperature Indication: | 3" Dia. Dial Thermometers (range: 50° to 500°F). |
| Air Compressor: | 2 cylinder, 9 CFM 100 psi, cast iron continuous duty rating. Timken Roller Bearings, on crankshaft, automotivve style intake filter. |
| Generator: | 2kW, 110 volts continuous duty rating. |
| Engine: | 8 HP, Honda Electric Start |
| Steel Skid: | Unit is mounted on 10 GA steel skid, with fork lift slots for easy loading and unloading. |
| Dimesions: | 66"L x 42"W x 60"H |
| Weight: | 900 lbs. |